|
|
WEG Combination Soft
Starters-GPH Series Controls
The WEG Combination Soft Starters the GPH Series is a general purpose AC
motor Soft Starter industrial package. With it's NEMA 4/12 enclosure and GPH
starters built for ruggedness and reliability it provides a complete and
effective AC motor starting and protection solution. The WEG
Combination Soft Starters are designed for simple and fast installation and
start-up, requiring only input power and output motor connections.
Applications
- Pumps
- Fans / Blowers
- Conveyors
- Compressors
- Agitators
- Crushers
- Saws
Features
- 5 - 150HP at 230V and 10 - 300HP at 460V
- NEMA 4/12 wall mount enclosure suitable
for dusty, wet or outdoor applications
- Circuit breaker with door mounted
operator provides built-in short circuit protection and input power
disconnect
- Automatic bypass contactor
- Fused Control Power Transformer (CPT)
- Start and Stop Pushbuttons and Run and
Fault Pilot Lights on the front cover
- Terminals for 2 or 3 wire remote
Start/Stop
- Keypad with protective cover mounted on
enclosure door
- All parameter changes are through the
cover-mounted keypad.
- Dust and water stay out of the
enclosure.
- Monitoring of current, voltage, kVA and
kW can be done from the outside.
- AC3 rated bypass contactor and motor
overload relay is standard on 5 - 30HP / 230V and 10 - 75HP / 460V
Optional Features:
- Keypad mounted inside enclosure
- No circuit breaker
- Legs for free standing enclosure
- AC3 rated bypass contactor with motor
overload relay
- 575V units are available.
Ordering
Information and Accessories:
GPH-NEMA 4/12 Enclosure - 230V
Input Power Supply: Three-Phase -
460VnIn
NOTE:( 1) "HP" rating based on "average FLA
Values" Use as a guide only. Motor FLA may vary with speed and manufacturer.
Always compare motor FLA to Nominal AMPS And Max Continuous AMPS of
Starters.
(2) Contact manufacturer for 380V, 575V and any other non-standard voltages
(3) Includes Control Power Transformer with fuses, circuit breaker, and
bypass contactor.
Products Quick Reference
WEG Combination Soft Starters GPH-NEMA 4/12
Enclosure - 230V
WEG
GPH005PC2001,
WEG
GPH010PC2001,
WEG
GPH015PC2001,
WEG
GPH025PC2001,
WEG
GPH030PC2001,
WEG
GPH050QC2001,
WEG
GPH060QC2001,
WEG
GPH075QC2001,
WEG
GPH100QC2001,
WEG
GPH125QC2001,
WEG
GPH150QC2001,
WEG
GPH200QC2001,
WEG
GPH250QC2001
WEG Combination Soft Starters - Input
Power Supply: Three-Phase - 460V
WEG
GPH010PC4001,
WEG
GPH020PC4001,
WEG
GPH030PC4001,
WEG
GPH050PC4001,
WEG
GPH075PC4001,
WEG
GPH100QC4001,
WEG
GPH125QC4001,WEG
GPH150QC4001,
WEG
GPH200QC4001,
WEG
GPH250QC4001,
WEG
GPH300QC4001,
WEG
GPH400QC4001,
WEG
GPH500QC4001
Contact our experienced
variable frequency drive specialists at Variable Frequency Drive Co
at 510-490-2187 to get your quote, place your order and arrange for
shipping. Our electrical specialists are standing by and ready to help
| WEG Variable Frequency Drives & Soft
Starters
|
 |
WEG CFW-08 Plus ( 1/3-10HP) Variable
Frequency Drives
The new WEG CFW-08 Plus Series with engineering improvements and
the re-design of their successful uLine VFD'S have produced one of
the most compact and pack featured microdrives in the marketplace. The
features and options in a NEMA1 enclosure allows the CFW-08 to be used
in many applications. Read more about the
WEG CFW-08 Plus Variable Frequency Drives.
|
 |
WEG CFW-09 ( 1-500 HP) Variable
Frequency Drives
The CFW-09 Variable Frequency Drive offers the most
advance technology in drives for three-phase AC induction motors.
The Vectrue Technology and it significant advancement allowing
VFD's to combine V/F, Sensorless Vector and closed loop vector (with
encoder) all in one control product. A innovated new
feature named Optimal Braking was introduced to simplify
applications that require braking torque, by eliminating the need for
the dynamic braking resistor it means a simpler, more compact and
economic solution. Read more about the
WEG CFW-09 Variable Frequency Drives.
|
 |
WEG CFW-10 Plus ( 1/4 - 3HP)
Variable Frequency Drives
With the expansion to the CFW-10 Variable Frequency Drive
Product Line, three new HP rating (1,2 and 3 HP) and frame sizes (Sizes
2 and 3) will complement the existing ratings. The benefits of the
CFW-10 is its compact size, easily mounted package, with a simplified
keypad and bright LED readout, complete diagnostics and fully
programmable I/O. The key benefits to the WEG CFW-10 is that it control
three-phase AC motors with a single-phase AC input. Increase flexibility
and decreased costs are achieved by eliminating the need for a step-up
transformer to operate three phase 230V AC motors when only single-phase
115V or 230V are available. With the new products lines, a single-phase
120 VAC input voltage will produce three phase 230V to drive motors up
to 1 HP and single-phase 230VAC input voltage will control motors up to
3HP.The CFW-10 is a perfect solution for many industrial and commercial
applications. Read more about the
WEG CFW-10 Plus Variable Frequency Drives.
|
 |
WEG Shark Drive™ ( 1 - 10 HP)
Variable Frequency Drives
The WEG Shark Variable Frequency Drive is an ideal solution with
its Stainless Steel NEMA 4X enclosure for high pressure wash down and
corrosive environments and is designed to complement the enclosure
ruggedness of WEG's Shark Motor Product Line. The Shark Drive's complete
package combination of the CFW-09's triple control capability
(Volts/Hertz, Sensorless or Closed Loop Vector) matched with the Shark
Drive's NEMA4X enclosure rating allows the Shark Drive™ to succeed in
virtually all applications in any industrial environment.
Read more about the
WEG Shark Drive Variable Frequency Drives.
|
 |
WEG Combination Soft Starters-GPH
Series (5-500 HP)
The WEG Combination Soft Starter, GPH Series packages is a very
simple and is designed for quick installation and start up. This package
only requires an input and output motor connection. The GPH series is
built for ruggedness and reliability and with its NEMA 4/12 enclosure it
is ideal for dusty and wet applications. Read more about the
WEG Combination Soft Starters-GPH Series Controls.
|
 |
WEG Crusher Duty-TPH Series Soft Starters (
100-600 HP)
WEG TPH Series provides a complete and
cost effective AC motor starting and protection solution. The TPH are
designed to withstand the most demanding AC motor starting applications.
While exceeding the requirements for the highest starting torque
requirements, plus with it's NEMA 4/12 enclosure making it ideal for
wash down and harsh conditions application. A emergency direct-on-line
starting is available at a flip of a switch plus an AC3 full HP rated
bypass contactor and motor overload relay is standard in the TPH series
which provides full motor protection.
Read more about the
WEG Crusher Duty-TPH Series Soft Starters.
|
 |
WEG SSW-03 Series Soft Starters ( 50-1000 HP)
The SSW-03 provides a complete and cost
effective solution with a full microprocessor based control, making
adjustments easy with the keypad start-up and still provides complete
motor protection. With the pump control feature which prevents running
pumps at no load and eliminates pipeline waterhammer.
Read more about the
WEG SSW-03 Series Soft Starters.
|
 |
WEG SSW-04 Series Soft Starters ( 5-75 HP)
The WEG SSW-04 are build for ruggedness
and reliability and provides a complete solution. With it's full
microprocessor based control which allows easy adjustment with the
keypad start-up, and complete motor protection.. With the pump control
feature which prevents running pumps at no load and eliminates pipeline
waterhammer. Read more
about the
WEG SSW-04 Series Soft Starters.
|
 |
WEG SSW-05 Series Soft Starters ( 5-75 HP)
The WEG SSW-05 is a compact fully digital
soft starter with state-of-the-art DSP controller. With the digital
construction some of the benefits includes: optimum operations,
diagnostics capability and full protection of the motor. The Status
LED"s alert the user of the operational status and with the dipswitches
and potentiometers simplicity in set-up and operation is assured. The
simplicity and the micro size and ease of set up makes it a quick and
easy solution. Read more
about the
WEG SSW-05 Series Soft Starters.
|
 |
WEG SSW-06 Series Soft Starters ( 3-2,500 HP)
The SSW-06 is WEG's third generation Soft Starter line.
The keypad, with dual display, has red LED digits which provide visibility and make
programming easier. Integral bypass contacts eliminate heat dissipation once the
motor is at full voltage, which makes it extremely compact and allows for simple
integration into non-ventilated enclosures and replacement of electro-mechincal
starters in Motor Control Centers.
Read more
about the
WEG SSW-06 Series Soft Starters.
|
 |
|
Soft Start Drives start motors at lower
voltages, slowly ramping up to operation voltage, which reduces wear
on mechanical gears, chains, sprockets, belts and gearboxes.
|
