|
|
The WEG TPH Series of Crusher Duty Soft Starters
conquer the most tough AC motor starting applications. The NEMA 4/12
enclosures makes it a candidate for harsh and wash down applications and it
surpass the highest starting torque requirements. The WEG Crusher Duty Soft
Starts includes an AC3 full HP rated bypass contactor and motor overload
relay. Emergency direct-on-line starting is available at a flip of a switch
while still providing full motor protection. With it ruggedness and
reliability the WEG TPH Series provides a cost effective AC motor starting
and protection solution.
Features
- Rated 500% for 60 seconds for
Crusher-Duty Applications.
- NEMA 4/12 WEG Blue enclosure. Suitable
for dusty, wet or outdoor applications.
- Narrow Design requires less space.
- Legs eliminate difficult wall mounting.
- Protective barriers over 460V and 120V
terminals.
- Circuit breaker with door mounted
operator provides built-in short circuit protection and power
disconnect.
- Full HP rated bypass contactor with
thermal overload relay and emergency start switch inside the enclosure (Softstart
- Off - Across the Line). Can be used for across the line start in event
of SSW failure.
- Full SSW protection during both start
and bypass provides full protection from over/under current, supply and
motor phase fault, phase unbalance, overtemp and over current.
- Keypad and full sized operator controls
on cover with steel frame NEMA 4 window and cover over keypad. All
parameter changes are through the cover-mounted key pad. Dust and water
stay out of the enclosure. Monitoring of current, voltage, kVa and kW
can be done from the outside.
- Terminations for remote start-stop
furnished - no need to trace control circuit for additional start-stops.
- 250VA 120V service receptacle - Power up
meters, lights and small tools without additional power lines.
- Modular multiple subpanel design.
- Ease of field modification or component
replacement.
Ordering
Information and Accessories:
TPH-NEMA 4/12 Enclosure
Input Power Supply: Three Phase 460V
**Includes 6" Legs
Products Quick Reference
WEG Crusher Duty Soft Starters - TPH-NEMA 4/12
Enclosure
Input Power Supply: Three Phase 460V
WEG
TPH100KD0000, WEG
TPH150KD0000, WEG
TPH200KD0000, WEG
TPH250KD0000, WEG
TPH300KD0000, WEG
TPH400KD0000, WEG
TPH500KD0000, WEG
TPH600KD0000
Contact our experienced variable
frequency drive specialists at Variable Frequency Drive Co at
510-490-2187 to get your quote, place your order and arrange for shipping.
Our electrical specialists are standing by and ready to help
| WEG Variable Frequency Drives & Soft
Starters
|
 |
WEG CFW-08 Plus ( 1/3-10HP) Variable
Frequency Drives
The new WEG CFW-08 Plus Series with engineering improvements and
the re-design of their successful uLine VFD'S have produced one of
the most compact and pack featured microdrives in the marketplace. The
features and options in a NEMA1 enclosure allows the CFW-08 to be used
in many applications. Read more about the
WEG CFW-08 Plus Variable Frequency Drives.
|
 |
WEG CFW-09 ( 1-500 HP) Variable
Frequency Drives
The CFW-09 Variable Frequency Drive offers the most
advance technology in drives for three-phase AC induction motors.
The Vectrue Technology and it significant advancement allowing
VFD's to combine V/F, Sensorless Vector and closed loop vector (with
encoder) all in one control product. A innovated new
feature named Optimal Braking was introduced to simplify
applications that require braking torque, by eliminating the need for
the dynamic braking resistor it means a simpler, more compact and
economic solution. Read more about the
WEG CFW-09 Variable Frequency Drives.
|
 |
WEG CFW-10 Plus ( 1/4 - 3HP)
Variable Frequency Drives
With the expansion to the CFW-10 Variable Frequency Drive
Product Line, three new HP rating (1,2 and 3 HP) and frame sizes (Sizes
2 and 3) will complement the existing ratings. The benefits of the
CFW-10 is its compact size, easily mounted package, with a simplified
keypad and bright LED readout, complete diagnostics and fully
programmable I/O. The key benefits to the WEG CFW-10 is that it control
three-phase AC motors with a single-phase AC input. Increase flexibility
and decreased costs are achieved by eliminating the need for a step-up
transformer to operate three phase 230V AC motors when only single-phase
115V or 230V are available. With the new products lines, a single-phase
120 VAC input voltage will produce three phase 230V to drive motors up
to 1 HP and single-phase 230VAC input voltage will control motors up to
3HP.The CFW-10 is a perfect solution for many industrial and commercial
applications. Read more about the
WEG CFW-10 Plus Variable Frequency Drives.
|
 |
WEG Shark Drive™ ( 1 - 10 HP)
Variable Frequency Drives
The WEG Shark Variable Frequency Drive is an ideal solution with
its Stainless Steel NEMA 4X enclosure for high pressure wash down and
corrosive environments and is designed to complement the enclosure
ruggedness of WEG's Shark Motor Product Line. The Shark Drive's complete
package combination of the CFW-09's triple control capability
(Volts/Hertz, Sensorless or Closed Loop Vector) matched with the Shark
Drive's NEMA4X enclosure rating allows the Shark Drive™ to succeed in
virtually all applications in any industrial environment.
Read more about the
WEG Shark Drive Variable Frequency Drives.
|
 |
WEG Combination Soft Starters-GPH
Series (5-500 HP)
The WEG Combination Soft Starter, GPH Series packages is a very
simple and is designed for quick installation and start up. This package
only requires an input and output motor connection. The GPH series is
built for ruggedness and reliability and with its NEMA 4/12 enclosure it
is ideal for dusty and wet applications. Read more about the
WEG Combination Soft Starters-GPH Series Controls.
|
 |
WEG Crusher Duty-TPH Series Soft Starters (
100-600 HP)
WEG TPH Series provides a complete and
cost effective AC motor starting and protection solution. The TPH are
designed to withstand the most demanding AC motor starting applications.
While exceeding the requirements for the highest starting torque
requirements, plus with it's NEMA 4/12 enclosure making it ideal for
wash down and harsh conditions application. A emergency direct-on-line
starting is available at a flip of a switch plus an AC3 full HP rated
bypass contactor and motor overload relay is standard in the TPH series
which provides full motor protection.
Read more about the
WEG Crusher Duty-TPH Series Soft Starters.
|
 |
WEG SSW-03 Series Soft Starters ( 50-1000 HP)
The SSW-03 provides a complete and cost
effective solution with a full microprocessor based control, making
adjustments easy with the keypad start-up and still provides complete
motor protection. With the pump control feature which prevents running
pumps at no load and eliminates pipeline waterhammer.
Read more about the
WEG SSW-03 Series Soft Starters.
|
 |
WEG SSW-04 Series Soft Starters ( 5-75 HP)
The WEG SSW-04 are build for ruggedness
and reliability and provides a complete solution. With it's full
microprocessor based control which allows easy adjustment with the
keypad start-up, and complete motor protection.. With the pump control
feature which prevents running pumps at no load and eliminates pipeline
waterhammer. Read more
about the
WEG SSW-04 Series Soft Starters.
|
 |
WEG SSW-05 Series Soft Starters ( 5-75 HP)
The WEG SSW-05 is a compact fully digital
soft starter with state-of-the-art DSP controller. With the digital
construction some of the benefits includes: optimum operations,
diagnostics capability and full protection of the motor. The Status
LED"s alert the user of the operational status and with the dipswitches
and potentiometers simplicity in set-up and operation is assured. The
simplicity and the micro size and ease of set up makes it a quick and
easy solution. Read more
about the
WEG SSW-05 Series Soft Starters.
|
 |
WEG SSW-06 Series Soft Starters ( 3-2,500 HP)
The SSW-06 is WEG's third generation Soft Starter line.
The keypad, with dual display, has red LED digits which provide visibility and make
programming easier. Integral bypass contacts eliminate heat dissipation once the
motor is at full voltage, which makes it extremely compact and allows for simple
integration into non-ventilated enclosures and replacement of electro-mechincal
starters in Motor Control Centers.
Read more
about the
WEG SSW-06 Series Soft Starters.
|
 |
|
Soft Start Drives start motors at lower
voltages, slowly ramping up to operation voltage, which reduces wear
on mechanical gears, chains, sprockets, belts and gearboxes.
|
