|
|
The WEG SSW-03 Series Soft Starters are reliability and rugged to match the
WEG motors, plus it provides a cost effective solution. With the
microprocessor based control which allows easy adjustment through the keypad
on start-up, and also gives complete motor protection. A pump control
features prevents running pumps at no load and it eliminates pipeline
waterhammer.
Applications
- Pumps
- Fans / Blowers
- Conveyors
- Compressors
- Agitators
- Crushers
- Mixers
Features
- 208-440V and 460-575V, 50/60Hz input
power supply
- Duty cycle: 300% of full load current
during 30 seconds every 6 minutes
- Keypad with LED display
- Four programmable isolated digital
inputs (24 VDC)
- Two programmable relay outputs (1 Amp -
250V)
- One differential analog input
- One programmable analog output
Protective features:
- Motor overload (TIMP)
- Under and overcurrent
- Power supply phase loss
- Motor phase loss
- Thyristor fault
- Phase sequence
- Soft starter over temperature and
external fault
Control features:
- Pump control
- Acceleration and deceleration
independently adjustable ramps
- Kick start
- Pedestal voltage
- Voltage ramp start
- Constant current start
- By-pass relay
- JOG
- DC braking
- Energy saving
- Auto-reset and fault history
Display readings:
- Motor Amps (kW, kVA, PF and
Volts)
Ambient:
- 104ēF (40ēC), 3300 ft
(1000m) altitude, 90% non-condensing humidity
Optional Features:
Ordering Information and Accessories:
SSWO3- Protected
Chassis Enclosure
Input Power Supply: Three-Phase - 230V
Input Power Supply: Three-Phase - 460V
Input Power Supply:
Three-Phase - 575V
Notes: 1) HP rating based on "average FLA
values". Use as a guide only. Motor FLA may vary with speed and
manufacturer. Always compare motor FLA to nominal AMPS and Max Continuous
AMPS of starters.
2) 120V Control and Blower Power Supply required.
SSW03 - IP20 "Finger-Safe" Enclosure
Input Power Supply: Three-Phase - 230V
Input Power Supply: Three-Phase - 460V
Notes: 1) HP rating based on "average FLA
values". Use as a guide only. Motor FLA may vary with speed and
manufacturer. Always compare motor FLA to nominal AMPS and Max Continuous
AMPS of starters.
Contact manufacturer for 575V
Includes Control Power Transformer with fuses.
Products Quick Reference
WEG Series Soft Starters - SSWO3- Protected Chassis Enclosure
Input Power Supply: Three-Phase - 230V
WEG
SSW031203D1,
WEG SSW031703D1,
WEG
SSW032053D1,
WEG
SSW032553D1,
WEG
SSW032903D1,
WEG
SSW033403D1,
WEG
SSW034103D1,
WEG
SSW034753D1,
WEG
SSW035803D1,
WEG
SSW036703D1,
WEG
SSW038003D1,
WEG
SSW039503D1
WEG Series Soft Starters - SSWO3- Protected Chassis Enclosure
Input Power Supply: Three-Phase - 460V
WEG
SSW031203G1,
WEG
SSW031703G1,
WEG
SSW032053G1,
WEG
SSW032553G1,
WEG
SSW032903G1,
WEG
SSW033403G1,
WEG
SSW034103G1,
WEG
SSW034753G1,
WEG
SSW035803G1,
WEG
SSW036703G1,
WEG
SSW038003G1,
WEG
SSW039503G1
WEG Series Soft Starters - SSWO3- Protected Chassis Enclosure
Input Power Supply: Three-Phase - 575V
WEG
SSW031203G1, WEG
SSW031703G1, WEG
SSW032053G1, WEG
SSW032553G1, WEG
SSW032903G1, WEG
SSW033403G1, WEG
SSW034103G1, WEG
SSW034753G1, WEG
SSW035803G1, WEG
SSW036703G1, WEG
SSW038003G1, WEG
SSW039503G1
WEG Series Soft Starters SSW03 - IP20 "Finger-Safe" Enclosure
Input Power Supply: Three-Phase - 230V
WEG
SSW031203D1IP20, WEG
SSW031703D1IP20, WEG
SSW032053D1IP20, WEG
SSW032553D1IP20, WEG
SSW032903D1IP20, WEG
SSW033403D1IP20, WEG
SSW034103D1IP20, WEG
SSW034753D1IP20, WEG
SSW035803D1IP20, WEG
SSW036703D1IP20, WEG
SSW038003D1IP20, WEG
SSW039503D1IP20
WEG Series Soft Starters SSW03 - IP20 "Finger-Safe" Enclosure
Input Power Supply: Three-Phase - 460V
WEG SSW031203G1IP20, WEG
SSW031703G1IP20, WEG
SSW032053G1IP2O, WEG
SSW032553G1IP20, WEG
SSW032903G1IP20, WEG
SSW033403G1IP20, WEG
SSW034103G1IP20, WEG
SSW034753G1IP20, WEG
SSW035803G1IP20, WEG
SSW036703G1IP20, WEG
SSW038003G1IP20, WEG
SSW039503G1IP20
Contact
our experienced variable frequency drive specialists at
Variable Frequency Drive Co at 510-490-2187 to get your quote, place your
order and arrange for shipping. Our electrical specialists are
standing by and ready to help
| WEG Variable Frequency Drives & Soft
Starters
|
 |
WEG CFW-08 Plus ( 1/3-10HP) Variable
Frequency Drives
The new WEG CFW-08 Plus Series with engineering improvements and
the re-design of their successful uLine VFD'S have produced one of
the most compact and pack featured microdrives in the marketplace. The
features and options in a NEMA1 enclosure allows the CFW-08 to be used
in many applications. Read more about the
WEG CFW-08 Plus Variable Frequency Drives.
|
 |
WEG CFW-09 ( 1-500 HP) Variable
Frequency Drives
The CFW-09 Variable Frequency Drive offers the most
advance technology in drives for three-phase AC induction motors.
The Vectrue Technology and it significant advancement allowing
VFD's to combine V/F, Sensorless Vector and closed loop vector (with
encoder) all in one control product. A innovated new
feature named Optimal Braking was introduced to simplify
applications that require braking torque, by eliminating the need for
the dynamic braking resistor it means a simpler, more compact and
economic solution. Read more about the
WEG CFW-09 Variable Frequency Drives.
|
 |
WEG CFW-10 Plus ( 1/4 - 3HP)
Variable Frequency Drives
With the expansion to the CFW-10 Variable Frequency Drive
Product Line, three new HP rating (1,2 and 3 HP) and frame sizes (Sizes
2 and 3) will complement the existing ratings. The benefits of the
CFW-10 is its compact size, easily mounted package, with a simplified
keypad and bright LED readout, complete diagnostics and fully
programmable I/O. The key benefits to the WEG CFW-10 is that it control
three-phase AC motors with a single-phase AC input. Increase flexibility
and decreased costs are achieved by eliminating the need for a step-up
transformer to operate three phase 230V AC motors when only single-phase
115V or 230V are available. With the new products lines, a single-phase
120 VAC input voltage will produce three phase 230V to drive motors up
to 1 HP and single-phase 230VAC input voltage will control motors up to
3HP.The CFW-10 is a perfect solution for many industrial and commercial
applications. Read more about the
WEG CFW-10 Plus Variable Frequency Drives.
|
 |
WEG Shark Drive™ ( 1 - 10 HP)
Variable Frequency Drives
The WEG Shark Variable Frequency Drive is an ideal solution with
its Stainless Steel NEMA 4X enclosure for high pressure wash down and
corrosive environments and is designed to complement the enclosure
ruggedness of WEG's Shark Motor Product Line. The Shark Drive's complete
package combination of the CFW-09's triple control capability
(Volts/Hertz, Sensorless or Closed Loop Vector) matched with the Shark
Drive's NEMA4X enclosure rating allows the Shark Drive™ to succeed in
virtually all applications in any industrial environment.
Read more about the
WEG Shark Drive Variable Frequency Drives.
|
 |
WEG Combination Soft Starters-GPH
Series (5-500 HP)
The WEG Combination Soft Starter, GPH Series packages is a very
simple and is designed for quick installation and start up. This package
only requires an input and output motor connection. The GPH series is
built for ruggedness and reliability and with its NEMA 4/12 enclosure it
is ideal for dusty and wet applications. Read more about the
WEG Combination Soft Starters-GPH Series Controls.
|
 |
WEG Crusher Duty-TPH Series Soft Starters (
100-600 HP)
WEG TPH Series provides a complete and
cost effective AC motor starting and protection solution. The TPH are
designed to withstand the most demanding AC motor starting applications.
While exceeding the requirements for the highest starting torque
requirements, plus with it's NEMA 4/12 enclosure making it ideal for
wash down and harsh conditions application. A emergency direct-on-line
starting is available at a flip of a switch plus an AC3 full HP rated
bypass contactor and motor overload relay is standard in the TPH series
which provides full motor protection.
Read more about the
WEG Crusher Duty-TPH Series Soft Starters.
|
 |
WEG SSW-03 Series Soft Starters ( 50-1000 HP)
The SSW-03 provides a complete and cost
effective solution with a full microprocessor based control, making
adjustments easy with the keypad start-up and still provides complete
motor protection. With the pump control feature which prevents running
pumps at no load and eliminates pipeline waterhammer.
Read more about the
WEG SSW-03 Series Soft Starters.
|
 |
WEG SSW-04 Series Soft Starters ( 5-75 HP)
The WEG SSW-04 are build for ruggedness
and reliability and provides a complete solution. With it's full
microprocessor based control which allows easy adjustment with the
keypad start-up, and complete motor protection.. With the pump control
feature which prevents running pumps at no load and eliminates pipeline
waterhammer. Read more
about the
WEG SSW-04 Series Soft Starters.
|
 |
WEG SSW-05 Series Soft Starters ( 5-75 HP)
The WEG SSW-05 is a compact fully digital
soft starter with state-of-the-art DSP controller. With the digital
construction some of the benefits includes: optimum operations,
diagnostics capability and full protection of the motor. The Status
LED"s alert the user of the operational status and with the dipswitches
and potentiometers simplicity in set-up and operation is assured. The
simplicity and the micro size and ease of set up makes it a quick and
easy solution. Read more
about the
WEG SSW-05 Series Soft Starters.
|
 |
WEG SSW-06 Series Soft Starters ( 3-2,500 HP)
The SSW-06 is WEG's third generation Soft Starter line.
The keypad, with dual display, has red LED digits which provide visibility and make
programming easier. Integral bypass contacts eliminate heat dissipation once the
motor is at full voltage, which makes it extremely compact and allows for simple
integration into non-ventilated enclosures and replacement of electro-mechincal
starters in Motor Control Centers.
Read more
about the
WEG SSW-06 Series Soft Starters.
|
 |
|
Soft Start Drives start motors at lower
voltages, slowly ramping up to operation voltage, which reduces wear
on mechanical gears, chains, sprockets, belts and gearboxes.
|
